Yaesu FT-7800R Operating Manual

Also see for FT-7800R: Brochure & specs Technical supplement

38 FT-7800R OPERATING MANUALMEMORY O PERATIONHYPER M EMORY C HANNEL O PERATIONThe FT-7800R usually stores, into memory, the operating frequency and some aspects ofoperating status (such as VFO scan, CTCSS/DCS data, repeater shift, power level etc.).However, the “Hyper Memory” Mode allows you to store the total current configuration ofthe radio into a special “Hyper” memory bank.Hyper Memory Storage1. Set up the transceiver according to the desired con-figuration.2. Press and hold in, for two seconds, the HyperMemory key ([1] through [5]), corresponding tothe Hyper Memory channel into which you wish tostore this configuration.Hyper Memory RecallPress the appropriate Hyper Memory key ([1] through[5]) to recall the desired Hyper Memory channel.On Hyper Memory Channels “2” through“5,” the current (original) configuration willlost when you recall any other Hyper Memory Chan-nel. To prevent this from happening, press and holdin the (current) Hyper Memory key to store the current configuration into that HyperMemory Channel before recalling anothe Hyper Memory Channel, or set Menu #17(HYPER) to enable the Automatic Writing feature for all Hyper Memories, includingHyper Memory “1.” See page 70 for details.