Yaesu FT-7800R Operating Manual

Also see for FT-7800R: Brochure & specs Technical supplement

27FT-7800R OPERATING MANUALMANUAL R EPEATER SHIFT ACTIVATIONIf the ARS feature has been disabled, or if you need to set a repeater shift direction otherthan that established by the ARS, you may set the direction of the repeater shift manually.To do this:1. Press and hold in the [BAND(SET)] key for 1/2 second to enter the Set mode.2. Rotate the DIAL knob to select Menu #33 (RPT.MOD).3. Press the [BAND(SET)] key momentarily, then rotate the DIAL knob to select the de-sired shift among “RPT.–,” “RPT.+,” and “RPT.OFF.”4. Press the [BAND(SET)] key momentarily to save the new setting, then press and hold inthe [BAND(SET)] key for 1/2 second to exit to normal operation.Changing the Default Repeater ShiftsIf you travel to a different region, you may need to change the default repeater shift so as toensure compatibility with local operating requirements.To do this, follow the procedure below:1. Press and hold in the [BAND(SET)] key for 1/2 second to enter the Set mode.2. Rotate the DIAL knob to select Menu #39 (SHIFT).3. Press the [BAND(SET)] key momentarily, then rotate the DIAL knob to select the newrepeater shift magnitude. The shift must be a multiple of 50 kHz.4. Press the [BAND(SET)] key momentarily to save the new setting, then press and hold inthe [BAND(SET)] key for 1/2 second to exit to normal operation.If you just have one “odd” split that you need to program, don’t change the “de-fault” repeated shifts using this Menu Item! Enter the transmit and receive fre-quencies separately, as shown on page 33.REPEATER O PERATION