Yaesu FT-7800R Operating Manual

Also see for FT-7800R: Brochure & specs Technical supplement

73FT-7800R OPERATING MANUALMenu #35 [RX MOD]Function: Selects the Receiving mode.Available Values: AUTO/FM/AMDefault: AUTO (Mode automatically changes according to operating frequency.)Menu #36 [S SRCH]Function: Selects the Smart Search Sweep mode.Available Values: SINGLE/CONTDefault: SINGLESINGLE: The transceiver sweeps the current band once in each direction starting on thecurrent frequency. All channels where activity is present (up to 15 in each direc-tion) are loaded into the Smart Search memories. Whether or not all 31 memoriesare filled, the search stops after one sweep in each direction.CONT: The transceiver makes a sweep in each direction as with the “Single” mode, but ifall 31 channels are not filled after the first sweep, the radio continues sweepinguntil they are all filled.Menu #37 [SCAN]Function: Selects the Scan-Resume mode.Available Values: TIME/BUSY/HOLDDefault: BUSYBUSY: The scanner will halt on a signal it encounters. Two seconds after the carrier hasdropped because the other station(s) ceased transmission, the scanner will resume.TIME: The scanner will halt on a signal it encounters, and will hold five seconds. If you donot take action to disable the scanner within five seconds, the scanner will resumeeven if the stations are still active.HOLD: The scanner will stop when a signal is received, and will not restart.Menu #38 [SCN MD]Function: Selects the Memory Scan channel-selection mode.Available Values: MEM/ONLYDefault: MEMMEM: The scanner will “skip” the flagged channels during scanning.ONLY: The scanner will only scan channels that are flagged (Preferential Scan List).Menu #39 [SHIFT]Function: Sets the magnitude of the Repeater Shift.Available Values: 0.00 - 99.95 MHz (50 kHz step)Default: Depends on the band of operation.MENU (“SET ”) M ODE