Yaesu FT3Dr Instruction Manual

Also see for FT3DE: Operating manual Manual Instruction manual Instruction manual Operating manual

Contents

21Notification of beacon or message arrival in a pop-up screenAPRS POPUP functionA notification can be set to appear in a pop-up display when an APRS beacon or messageis received from a partner station.1 Press and hold the [DISP] key → Touch [APRS] → [9 APRS POPUP].2 Turn the DIAL to select the item to be setRefer to the list of set mode actions (page 48) for details of each item.Mic-E / POSITION / WEATHER / OBJECT / ITEM / STATUS / OTHER / MY PACKET/ MSG / GRP / BLN / MY MSG / DUP.BCN / DUP.MSG / ACK.REJ / OTHER MSG3 Press the [DISP] key.The cursor will move to the set value.4 Turn the DIAL to select the set value.OFF: Popup screen is not displayed.ALL 2 s - ALL 60 s: Sets the display time of a popup for 2 to 60 seconds.ALL CNT: Popup continues to be displayed until a key is operated.BND 2 s - BND 60 s: Content is displayed in 2 alphabetic characters on the banddisplay section on the screen for 2 to 60 seconds. (See page22).BND CNT: Content is displayed in 2 alphabetic characters on the banddisplay section on the screen until a key is operated (See page22).“ALL” cannot be selected in MY MSG / DUP.BCN / DUP.MSG / ACK.REJ / OTHERMSG.5 Press the [BACK] key.6 Repeat Step 2 to 5 to set the remaining items.7 Press the PTT.To exit the set mode and return to the operating screen.