Yaesu FT3Dr Instruction Manual

Also see for FT3DE: Operating manual Manual Instruction manual Instruction manual Operating manual

Contents

54y 16 BEACON TXSet the automatic beacon transmit interval.Setting Item: MANUAL / AUTO / SMARTDefault: MANUALExplanation:Set the method the APRS BEACON is automatically transmitted.You can also change the transmission method by touching in the APRS MESSAGELIST or APRS STATION LIST screen and then touching the appropriate [BEACON].MANUAL: Touch [F MW] followed by [BCN-TX] to transmit the APRS BEACON.Touch in the APRS STATION LIST screen followed by the [BEACON TX]to transmit.AUTO: An APRS BEACON of your station is transmitted automatically according toBEACON INTERVAL settings.SMART: A BEACON is automatically transmitted using the SmartBeaconing TM function.This setting can only be selected if: STATUS setting in [APRS] → [27SmartBeaconing] is set between Type 1 and Type 3, and [APRS] → [24 MYPOSITION] is set to GPS.y 17 COM PORT SETTINGCOM Port settingSetting Item: STATUS: ON / OFFSPEED: 4800 / 9600 / 19200 / 38400INPUT: OFF / GPSOUTPUT: OFF / GPS / WAY.PWAYPOINT: NMEA9 / NMEA6 / NMEA7 / NMEA8Mic-E: ON / OFFPOSIT: ON / OFFWEATHER: ON / OFFOBJECT: ON / OFFITEM: ON / OFFDefault: STATUS: OFFSPEED: 9600INPUT: OFFOUTPUT: OFFWAYPOINT: NMEA9Mic-E: ONPOSIT: ONWEATHER: ONOBJECT: ONITEM: ONExplanation:STATUS: OFF: Set to OFF when data terminal is not in use.ON: Set to ON when using data terminal.Various setting items are added when ON is selected.SPEED: Set the communication speed for the data terminal.