23Audio notification of a beacon or message receivedAPRS RINGER functionAn audio notification can be set to sound when an APRS beacon arrives from a partnerstation.1 Press and hold the [DISP] key → Touch [APRS] → [10 APRS RINGER].2 Turn the DIAL to select the item to be set.Please refer to the list of set mode actions (page 50) for the details of each item.Mic-E / POSITION / WEATHER / OBJECT / ITEM / STATUS / OTHER / MY PACKET /MSG / GRP / BLN / MY MSG / DUP.BCN / DUP.MSG / ACK.REJ / OTHER MSG / TXBCN / TX MSG3 Press the [DISP] key.4 Turn the DIAL to select “ON” or “OFF”.5 Press the [BACK] key.6 Repeat Step 2 to 5 to set the remaining items.7 Press the PTT.To exit the set mode and return to the operating screen.Displaying RAW packet dataDisplay the packet data (raw data) of the partner station from the APRS STATION LISTdetail screen.1 Touch [F MW] followed by [S.LIST].The APRS STATION LIST screen will be displayed.2 Turn the DIAL to select the beacon.Select the beacon station to confirm the RAW packet data.3 Press the [DISP] key.A detail screen of the APRS STATION LIST will appear in the display.4 Touch followed by [RAW].The RAW packet data will appear in the display.Turn the DIAL to scroll the screen display.5 Touch followed by [NORMAL] to return to the detailscreen.6 Press the [BACK] key twice.To exit the APRS STATION LIST screen and return to theoperating screen.FTM-400D 04/0712.5km 15:36Speed 68km/hCourse 47̊Alt 36m(Off duty)E JA1ZRL-9