7Setting the symbol of your own stationThis sets the transmit symbol of your own station. The symbol can be selected fromamong 48 types.The default setting when shipped from the factory is “ ”, “ ”, “ ”, “ ”.1 Press and hold the [DISP] key → Touch [APRS] → [25 MY SYMBOL].2 Turn the DIAL to select the symbolThe following four symbol types can be selected as yourown symbol: “ICON 1”, “ICON 2”, “ICON 3” and “ICON 4”.If “ICON 4” is selected, symbol characters can be inputdirectly when “25 MY SYMBOL (User)” appears. * Seethe following page on how to enter the characters.3 Press the [DISP] keyThe cursor will move to the “Code” area of the table below. You can turn the DIAL toselect a frequently used symbol from the symbols shown in the table below).Remark The default value of each symbol is as follows.MY SYMBOL Code Symbol1 [ /[ ] Human2 [ /b ] Bicycle3 [ /> ] Car4 [ YY ] Yaesu Radio4 Press the [DISP] key.The symbol of your own station will be set.5 Press the PTT.To exit the set mode and return to the operating screen.25 MY SYMBOLICON 1Human/Person[ /[ ]PUSH“DISP”