Yaesu FT3Dr Instruction Manual

Also see for FT3DE: Operating manual Manual Instruction manual Instruction manual Operating manual

Contents

34Receiving messagesWhen a message is received, a pop-up screen appears, together with a “pee po pee po...”audio alarm and a flashing strobe (white LED), followed by the screen below.MSG 01 *RX JA1ZRL...................................................................Touch [F MW] in the frequency display screen followed by [M.LIST] to display the APRSMESSAGE LIST screen.Reference Touch followed by [S.LIST] to move to the APRS STATION LIST screen.1 Turn the DIAL to select a received message.Turn the DIAL to scroll the screen up and down and select a received message.2 Press the [DISP] key.The APRS MESSAGE LIST detail screen will appear for you to check the message.Reference Touch followed by [MSG EDIT] to display the message edit screen.3 Press the [BACK] key.Return to the APRS MESSAGE LIST screen.Tips• A “pee po pee po pee po...” alarm will sound when a group/bulletin messageis received and the call sign will be displayed as shown in the right screen.• A “pee...” alarm will sound when a message ACK is received and the “AM>(call sign)” will be displayedon the screen.• A “pee....” alarm will sound when a message REJ (reject) is received and the “RM>(call sign)” will bedisplayed on the screen.• The operation of the flashing (white LED) display can be changed by selecting [APRS] → [5 APRSMSG FLASH] in the set mode.• The ACK/REJ display can be changed by the [APRS] → [9 APRS POPUP] setting in the set mode.