FTA-310 OperATing MAnuAl 25advanced operatIonVOX OperationIf you want to have both hands free, use the (user-supplied) Headset and activate the VOX (voice-actuatedtransmit/receive switching) system.Note: The VOX system does not function when usingjust the internal microphone; an external headset mustbe used.To activate the VOX system using the Menu System: Press the [F] key, then press downward on theVOLUME knob to activate the Menu (“SET”) mode. Rotate the DIAL selectorknob to select Menu Item 21“VOX.” Press downward on the VOL-UME knob to enable adjustment of this Menu item. Rotate the DIAL selector knob to select “on” (to en-able the VOX system). When you have made your selection, press down-ward on the VOLUME knob to save the new set-ting, and then press the PTT switch to exit to nor-mal operation. Without pressing the PTT switch, speak into themicrophone in a normal voice level. When you startspeaking, the transmitter should be activated auto-matically. When you finish speaking, the transceivershould return to the receive mode (after a short delay). To cancel VOX and return to PTT operation, justrepeat the above procedures, selecting “oFF” in step4 above.When the VOX system is acti-vated, the “ ” icon will appearon the display.The FTA-310 provides for adjustment of the VOX Gainvia the Menu, to prevent accidental transmitter activa-tion in a noisy environment. To set the VOX Gain: Press the [F] key, then press downward on the VOL-UME knob to activate the Menu (“SET”) mode. Rotate the DIAL selectorknob to select Menu Item 23“VSNS.” Press downward on the VOL-UME knob to enable adjustment of this Menu item. While speaking into the microphone, rotate theDIAL selector knob to the point where the transmit-ter is quickly activated by your voice, without caus-ing background noise to activate the transmitter. When you have selected the optimum setting, pressdownward on the VOLUME knob to save the newsetting, and then press the PTT switch to exit tonormal operation.