104Functions to Use as NecessaryFunctions to Use as NecessaryCopying the radio data to another transceiverThe memory channels and settings in the set-up menu can be copied to another FTM-100DR transceiver. This is convenient, for example, to configure the transceiver tomatch to the settings of stations that you communicate with frequently.Using a microSD memory cardThe data files saved in the FTM-100DR can be selected and copied to a microSDmemory card which may then be used to transfer the data to other FTM-100DRtransceivers.Copying data to a microSD memory card1 Insert a microSD memory card into the transceiver.Tip See “Inserting a microSD memory card” on page 32.2 Press and hold for over one second.The Setup menu appears.3 Rotate the DIAL to select [11 SD], then press .The menu list appears.4 Rotate the DIAL to select [1 BACKUP], then press.Displays the screen where you can select the copydirection.5 Rotate the DIAL to select [1 Write to SD], then press.The screen is displayed where the type of data to betransferred is selected.“1 ALL”: Copies all data in the transceiver.“2 MEMORY”: Copies only information registered to the memory channels.“3 SETUP”: Copies only settings in the Setup menu.6 Rotate the DIAL to select the data to be copied, andthen press .The confirmation screen appears.
