143Customizing Menu Settings and User PreferencesSetup menu operations: 9 DATASetting the COM port (1 COM PORT SETTING)Set the communication speed and functions when using the DATA jack on the rear panelof the transceiver as the COM port.1 Press and hold for over one second.The Setup menu appears.2 Rotate the DIAL to select [9 DATA], then press .3 Rotate the DIAL to select [1 COM PORT SETTING],then press .The detail settings screen appears.4 Rotate the DIAL to select [COM SPEED], then press.5 Rotate the DIAL to select the desired communication speed, then press .The setting switches as follows:“4800 bps” → “9600 bps” → “19200 bps” → “38400 bps” → “57600 bps”Tip The default setting: 9600 bps6 Rotate the DIAL to select [COM OUTPUT], thenpress .7 Rotate the DIAL to select the information you want to output.“OFF” → “GPS OUT” → “PACKET” → “WAYPOINT”OFF: Does not use the COM port output function (deactivate the function).GPS OUT: Outputs the GPS data that the transceiver acquired.PACKET: Outputs the AX.25 packet communication data received using the internalmodem function.WAYPOINT: Outputs the beacon location information of other stations you canacquire from the received APRS packet as WAYPOINT data.Tip The default setting: OFF
