71ScanningMonitoring the home channelSetting the dual receive restart settingSet how the transceiver dual receive mode operates after the signal on the homechannel disappears by selecting one of the following 2 options:(1) Restarts dual receive operation in 3 seconds (AUTO).(2) Stops dual reception and continues receiving signals on the home channel (HOLD).1 Press and hold for over one second.The Setup menu appears.2 Rotate the DIAL to select [5 SCAN], and then press.The menu list appears.3 Rotate the DIAL to select [1 DUAL WATCH STOP],then press .The setting options appear.4 Rotate the DIAL to select the desired setting.Select “1 AUTO” or “2 HOLD”.Tip The default setting: 1 AUTO5 Press and hold for over one second.Sets the dual reception restart setting and returns the display to the previouslyviewed screen.Setting the channel signal reception time when using the dual reception functionSet the time interval to check the HOME channel when using the dual reception function.1 Press and hold for over one second.The Setup menu appears.2 Rotate the DIAL to select [5 SCAN], and thenpress .The menu list appears.3 Rotate the DIAL to select [4 DUAL WATCHMODE], then press .The setting options appear.4 Rotate the DIAL to select the time interval to checkthe home channel.Select one from [0.3sec] to [10sec].Tip The default setting: 5.0 secSupplement The HOME channel reception time is fixed to0.3sec.5 Press and hold for over one second.Sets the time interval to check the Home channel and returns the screen to thepreviously viewed screen.
