51Using the MemoryUsing the MemoryFrequently used frequencies and settings can be registered to the memory channels.The preset channels may be quickly recalled for convenient operation. The transceiveris also equipped with the following memory functions:· Skip memory channels to preclude reception during scanning ( page 67)· Scan only the specified memory channels ( page 67)· “Programmable Memory Scan (PMS)” that scans only the specified frequency range(in the same frequency band) ( page 68)The individual operating frequency and operating mode (modulation mode), as well asthe other operating information, can be saved for each normal memory channel andPMS memory channel.• Operating frequency • Modulation mode* • Memory tag• Repeater information • Tone information • DCS information• Memory skip information • Transmit power*Digital mode and analog mode information are not stored in the memory.Registering to the memory channelCautionThe information registered to the memory channel may be lost due to incorrect operation, staticelectricity or electrical noise. Data may also be lost due to component failures and repairs. Make sureto write down the information registered to the memory channels on a piece of paper or save the datato a backup microSD card.A total of 500 memory channels channels are available for each of the A-band andB-band.1 Switch to VFO mode.2 Rotate the DIAL to tune to the desired frequency.Select the frequency you want to register to amemory channel.
