POWR Power unit5-33 6C13G112. Assemble the rocker arm assemblies 1and rocker arm shaft 2, and then installthe tensioners 3 and stopper guides 4to the rocker arm shaft by installing thebolts 5.NOTE:Make sure that the arrow marks b on thetensioners are facing up.3. Install the rocker arm shaft assembly tothe cylinder head by installing the bolts,and then tighten them to the specifiedtorque.CAUTION:Be sure not to damage the washers 6when installing the rocker arm shaftassembly to the cylinder head.Installing the oil pump1. Install the oil pump 1 by aligning the oilpump drive shaft a with the camshaft pinb.NOTE:Before installing the oil pump, be sure to fill itwith a small amount of engine oil through theoil passages c.S6C15570MM66T R..Rocker arm shaft bolt:18 N·m (1.8 kgf·m, 13.3 ft·lb)S6C156106S6C155801c
