6C13G11 6-14123456789Removing the drive shaft1. Remove the drive shaft assembly andpinion, and then pull out the forwardgear.Disassembling the drive shaft1. Install the pinion nut 1, tighten it fingertight, and then remove the drive shaftbearing 2 using a press.CAUTION:• Do not press the drive shaft threads adirectly.• When removing the drive shaft bearing,do not damage the drive shaft collar 4.• Do not reuse the bearing, alwaysreplace it with a new one.Disassembling the forward gear1. Remove the taper roller bearing from theforward gear using a press.CAUTION:Do not reuse the bearing, always replaceit with a new one.Disassembling the oil seal housing1. Remove the oil seals using a flat headscrewdriver.Drive shaft holder 4 1: 90890-06518Pinion nut holder 2:New: 90890-06715Current: 90890-06505Bearing inner race attachment 3:90890-06641S68S6360J12Bearing separator 1: 90890-06534S66T6130Drive shaft and lower case (F50, F60)
