6C13G11 2-10123456789Starter motorType Sliding gearOutput kW 1.4Cranking time limit Second 30BrushesStandard length mm (in) 15.5 (0.61)Wear limit mm (in) 9.5 (0.37)CommutatorStandard diameter mm (in) 29.0 (1.14)Wear limit mm (in) 28.0 (1.10)MicaStandard undercut mm (in) 0.8 (0.03)Wear limit mm (in) 0.2 (0.01)Charging systemFuse A 20, 30Stator coil output peak voltage(W – W)at cranking (unloaded) V 13.2at 1,500 r/min (unloaded) V 42.2at 3,500 r/min (unloaded) V 96.6Stator coil resistance(*1)at 20 °C (68 °F) (W – W) Ω 0.52–0.63Rectifier Regulator outputpeak voltage (R – B)at 1,500 r/min (unloaded) V 13.0at 3,500 r/min (unloaded) V 13.0Power trim and tilt systemTrim sensorSetting resistance (P – B) Ω 9–11Resistance (P – B) Ω 9–288.3Fluid type ATF Dexron IIBrushesStandard limit mm (in) 11.0 (0.43)Wear limit mm (in) 4.5 (0.18)CommutatorStandard limit mm (in) 19.0 (0.75)Wear limit mm (in) 18.0 (0.71)MicaStandard undercut mm (in) 1.5 (0.06)(*1) The figures are for reference only.Item Unit ModelF50FED F50FEHT F50FET FT50GETMaintenance specification
