Components25EMU39243Throttle friction adjusterThe throttle friction adjuster provides adjust-able resistance when the throttle grip isturned, and can be set according to operatorpreference.To increase resistance, turn the throttle fric-tion adjuster clockwise.To decrease resistance, turn the throttle fric-tion adjuster counterclockwise. When con-stant speed is desired, tighten the throttlefriction adjuster to maintain the desired throt-tle setting. WARNING! Do not overtightenthe throttle friction adjuster. If there is toomuch resistance, it could be difficult toturn the throttle grip, which could result inan accident. [EWM02261]F2.5AF4B, F5A, F6CEMU25995Engine shut-off cord (lanyard) andclipThe clip must be attached to the engine shut-off switch for the engine to run. The cordshould be attached to a secure place on theoperator’s clothing, or arm or leg. Should theoperator fall overboard or leave the helm, thecord will pull out the clip, stopping ignition tothe engine. This will prevent the boat fromrunning away under power. WARNING! At-tach the engine shut-off cord to a secureplace on your clothing, or your arm or legwhile operating. Do not attach the cord toclothing that could tear loose. Do not routethe cord where it could become entangled,preventing it from functioning. Avoid acci-dentally pulling the cord during normaloperation. Loss of engine power meansthe loss of most steering control. Also,without engine power, the boat could slowrapidly. This could cause people and ob-jects in the boat to be thrown forward.[EWM00122]1. Start mark “ ”2. Notch1. Throttle friction adjusterZMU06808121ZMU073611. Throttle friction adjusterZMU067241