Operation60F2.5A F4B, F5A, F6CEMU42830Adjusting trim angle for manual tiltmodelsWARNINGEWM00400 Stop the engine before adjusting thetrim angle. Use care to avoid being pinched whenremoving or installing the rod. Use caution when trying a trim positionfor the first time. Increase speed gradu-ally and watch for any signs of instabilityor control problems. Improper trim an-gle can cause loss of control.There are 4 or 5 holes provided in the clampbracket to adjust the outboard motor trim an-gle.1. Stop the engine.2. Tilt the outboard motor up, and then re-move the trim rod from the clamp bracket.1. Trim operating angle 1. Trim operating angleZMU067541
