Operation69EMU40041Procedure for returning to normal cruising1. To tilt the outboard motor down to thenormal running position, move the gearshift lever to the neutral position.2. Slightly tilt the outboard motor up, andthen slowly tilt the outboard motor downwhile pulling the tilt support bar up.EMU28195Cruising in other conditionsCruising in salt waterAfter operating in salt water, flush the coolingwater passages with fresh water to preventthem from becoming clogged. Also rinse theoutside of the outboard motor with fresh wa-ter.Cruising in muddy, turbid, or acidic waterYamaha strongly recommends that you usethe optional chromium-plated water pump kit(see page 16) if you use the outboard motor inacidic water or water with a lot of sediment init, such as muddy or turbid (cloudy) water. Af-ter operating in such water, flush the coolingpassages with fresh water to prevent corro-sion. Also rinse the outside of the outboardmotor with fresh water.1. Shallow water cruising position2. Tilt support bar1. Neutral position1. Tilt support barZMU06760211ZMU06749ZMU068811
