Basic components16placed to be sure steering is correct. Besure you have tightened the bolt after ad-justing the trim tab.If the boat tends to veer the left (port side),turn the trim tab rear end to the port side “A” inthe figure. If the boat tends to veer the right(starboard side), turn the trim tab end to thestarboard side “B” in the figure.CAUTION:ECM00840The trim tab also serves as an anode toprotect the engine from electrochemicalcorrosion. Never paint the trim tab as it willbecome ineffective as an anode.EMU26340Tilt support lever for power trim andtilt or hydro tilt modelTo keep the outboard motor in the tilted up po-sition, lock the tilt support lever to the clampbracket.EMU26382Top cowling lock lever (pull up type)To remove the engine top cowling, pull up thelock lever(s) and lift off the cowling. When in-stalling the cowling, check to be sure it fitsproperly in the rubber seal. Then lock thecowling by moving the lever(s) downward.1. Trim tab2. Bolt3. Cap123ZMU02525ABAB ZMU018631. Tilt support lever1. Top cowling lock lever(s)ZMU042251
