Yamaha F75D Ower's Manual

Contents

Maintenance36EMU28216SpecificationsDimension:Overall length:817 mm (32.2 in)Overall width:479 mm (18.9 in)Overall height L:1582 mm (62.3 in)Overall height X:1710 mm (67.3 in)Transom height L:536 mm (21.1 in)Transom height X:664 mm (26.1 in)Weight (without propeller) L:168.0 kg (370 lb)Weight (without propeller) X:172.0 kg (379 lb)Performance:Full throttle operating range:5000–6000 r/minMaximum output:F75TR 55.2 kW@5500 r/min (75 HP@5500r/min)F90TR 66.2 kW@5500 r/min (90 HP@5500r/min)Idling speed (in neutral):700 ±50 r/minEngine:Type:4-stroke LDisplacement:1596.0 cm³ (97.39 cu.in)Bore × stroke:79.0 × 81.4 mm (3.11 × 3.20 in)Ignition system:TCISpark plug (NGK):LFR5A-11Spark plug gap:1.0–1.1 mm (0.039–0.043 in)Control system:Remote controlStarting system:ElectricStarting carburetion system:Electronic fuel injectionValve clearance (cold engine) IN:0.17–0.23 mm (0.0067–0.0091 in)Valve clearance (cold engine) EX:0.31–0.37 mm (0.0122–0.0146 in)Min. cold cranking amps (CCA/SAE):380.0 AMin. marine cranking amps (MCA/ABYC):502.0 AMin. reserve capacity (RC/SAE):124 minutesAlternator output for battery DC:25.0 ADrive unit:Gear positions:Forward-neutral-reverseGear ratio:2.31(30/13)Trim and tilt system:Power trim and tiltPropeller mark:KFuel and oil:Recommended fuel:Regular unleaded gasolineMin. pump octane:86Recommended engine oil:4-stroke outboard motor oilEngine oil grade API:API SE, SF, SG, SH, SJEngine oil type SAE:SAE10W30 or SAE10W40Lubrication:Wet sumpEngine oil quantity (excluding oil filter):4.3 L (4.55 US qt) (3.78 Imp.qt)Recommended gear oil:Hypoid gear oil SAE#90Gear oil quantity:670.0 cm³ (22.65 US oz) (23.63 Imp.oz)Tightening torque for engine:Spark plug:25.0 Nm (18.4 ft-lb) (2.55 kgf-m)Propeller nut:35.0 Nm (25.8 ft-lb) (3.57 kgf-m)Engine oil drain bolt:28.0 Nm (20.7 ft-lb) (2.86 kgf-m)Engine oil filter:18.0 Nm (13.3 ft-lb) (1.84 kgf-m)