Yamaha F75D Ower's Manual

Contents

Basic components20EMU26700ClockPress the “ ” (mode) button repeatedlyuntil the indicator on the face of the gaugepoints to “ ” (time). To set the clock, besure the gauge is in the “ ” (time) mode.Press the “ ” (set) button; the hour displaywill begin blinking. Press the “ ” (mode)button until the desired hour is displayed.Press the “ ” (set) button again, the minutedisplay will begin blinking. Press the “ ”(mode) button until the desired minute is dis-played. Press the “ ” (set) button again tostart the clock.NOTE:The clock operates on battery power. Discon-necting the battery will stop the clock. Resetthe clock after connecting the battery.EMU26710Fuel gaugeThe fuel level is indicated by eight segments.When all segments are showing, the fuel tankis full.CAUTION:ECM00860The Yamaha fuel tank sensor differs fromconventional sensors. Incorrectly settingthe selector switch on the gauge will givefalse readings. Consult your Yamaha deal-er on how to correctly set the selectorswitch.NOTE:The fuel level reading can be affected by theposition of the sensor in the fuel tank and theattitude of the boat in the water. Operationwith bow-up trim or continuous turning cangive false readings.EMU26720Fuel warning indicatorIf the fuel level decreases to one segment, thefuel level warning segment will begin to blink.CAUTION:ECM00880Do not continue to operate the engine withfull throttle if a warning device has activat-ed. Get back to the port within trolling en-gine speed.EMU26730Low battery voltage warning indicatorIf battery voltage drops, the display will auto-matically turn on and begin to blink.1. Fuel level warning segmentZMU01745