Yamaha F75D Ower's Manual
                                                                           | |
Contents
|
Maintenance46 If you have any question about properlydoing this procedure, consult yourYamaha dealer. Do not perform this procedure on a hotor running engine. Allow the engine tocool. There will be fuel in the fuel filter. Keepaway from sparks, cigarettes, flames orother sources of ignition. This procedure will allow some fuel tospill. Catch fuel in a rag. Wipe up anyspilled fuel immediately. The fuel filter must be reassembledcarefully with the O-ring, filter cup, andhoses in place. Improper assembly orreplacement could result in a fuel leak,which could result in a fire or explosionhazard.EMU30640Cleaning fuel filterNOTE:If any water is in the fuel, the float will rise. Ifso, remove the cup and drain the water.1. Unscrew the filter cup, catching anyspilled fuel in a rag.2. Remove the filter element, and wash it insolvent. Allow it to dry. Inspect the filter el-ement and O-ring to make sure they arein good condition. Replace them if neces-sary. If any water is found in the fuel, theYamaha portable fuel tank or other fueltanks should be checked and cleaned.3. Reinstall the filter element in the cup.Make sure the O-ring is in proper positionin the cup. Firmly screw the cup onto thefilter housing.4. Attach the filter assembly to the bracket.5. Run the engine and check the filter andlines for leaks.EMU29040Inspecting idling speedWARNINGEWM00450 Do not touch or remove electrical partswhen starting or during operation. Keep hands, hair, and clothes away fromthe flywheel and other rotating partswhile the engine is running. 2-hp models: The propeller rotateswhenever the engine is running. Do notmove the throttle control lever from thestart position during warm-up. The boatcould unexpectedly start to move, whichcould result in an accident.1. Filter cup2. Filter element3. O-ring4. Filter housing5. Float13245ZMU04269 |
Related manuals for Yamaha F75D
manualsdatabase
Your AI-powered manual search engine