Yamaha PDM-4210E User Manual

Also see for PDM-4210E: User manual

13ENGLISHOPERATING INSTRUCTIONSTurning Power On and Off• To turn the monitor power on, press the main powerswitch on the monitor main unit to ON, and then pressthe SUB POWER button or the ON/OFF or ON button onthe remote control.• To turn the monitor power off, press the SUB POWERbutton or the ON/OFF or OFF button on the remotecontrol, and then set the main power switch on themonitor main unit to OFF.• During normal use, the main power switch is set in the ONposition, and the monitor can then be turned ON/OFF using theSUB POWER button or the ON/OFF button on the remotecontrol.Indicating lampIndicatinglamp Power status OperatingOff Off When the main power switch is setto OFF.Lights red Off(standby)When the main power switch isON, and the OFF button on theremote control or the SUB POWERbutton on the underside of thefront of the frame is OFF.Lights green OnWhen the main power switch isON, and the ON button on theremote control or the SUB POWERbutton on the underside of thefront of the frame is ON.Lights orange Off(Power Save)When the main power switch isON, and the ON button on theremote control or the SUB POWERbutton on the underside of thefront of the frame is ON.However, the indicator also light orangewhen the unit is in POWER SAVE mode.When the indicating lamp lights in orange or the message “No Sync.Signal”, “Power Save” or “Invalid Scan Freq.” appears on thescreen, see “Power Save Mode” or “Symptoms that Appear to beFailures.”AV1 AV2RGB 1 RGB 2AV3MUTE VOLVOLAV4AUTO PinPOKSIZE RECALLMENUID ID SETPOWER OFFbuttonPOWER ONbuttonPOWER ON/OFFbuttonSUB-POWER buttonMain power switchIndicating lampATTENTION• Avoid repeatedly turning the monitor on and off at shortintervals. Failures might result from such operation.• Turn off the main power switch if you do not plan to use themonitor for an extended period of time.• If a power failure occurs while the main unit is running, it will bepowered on upon recovery from the failure. Turn off the unitmain power switch before you leave the area in which the mainunit is located.22 24