Yamaha PDM-4210E User Manual

Also see for PDM-4210E: User manual

3ENGLISHCAUTION: READ THIS BEFORE OPERATING YOUR UNIT.This Plasma monitor has been designed and manufactured to meet international safety standards, but like any electrical equipment, care mustbe taken if you are to obtain the best results and safety is to be assured.Before using this product, please read and understand the Safety Instructions thoroughly to ensure correct usage, and follow all theinstructions.Never use the monitor if a problem occurs.Abnormal operations such as smoke, strange odor, no image, no sound, excessive sound, damaged casing, elements, cables, penetration ofliquids or foreign matter, etc. can cause a fire or electrical shock.In such case, immediately turn off the power switch and then disconnect the power plug from the power outlet. After making sure that the smokeor odor has stopped, contact your dealer. Never attempt to make repairs yourself because this could be dangerous.Do not insert liquids or foreign objects.Penetration of liquids or foreign objects could result in fire or electrical shock. Use special caution in households where children are present.If liquids or foreign objects should enter the projector, immediately turn off the power switch, disconnect the power plug from the power outletand contact your dealer.• Do not place the monitor in a bathroom.• Do not expose the monitor to rain or moisture.• Do not place flower vases, pots, cups, cosmetics, liquids such as water, etc on or around the monitor.• Do not place metals, combustibles, etc on or around the monitor.Never disassemble or modify the monitor.The monitor contains high voltage components. Modification could result in fire or electrical shock.• Never remove any fixed cover.Do not give the monitor any shock or impact.If the monitor should be shocked and/or broken, it could result in an injury, and continued use could result in fire or electrical shock.If the glass panel is broken or damaged, immediately turn off the power switch, disconnect the power plug from the power outlet and contactyour dealer.Do not place the monitor on an unstable surface.If the monitor should be dropped and/or broken, it could result in an injury, and continued use could result in fire or electrical shock.• Do not place the monitor on an unstable, slanted or vibranting surface such as a wobbly or inclined stand.Do not obstruct the ventilation of the monitor.If the ventilation is obstructed during the operation of the monitor or just after switching off the power, it could result in damage and shorten thelifespan of your monitor due to overheating. Make sure there is ample ventilation.• Keep a space of 100mm (10cm) or more between the sides, rear and top of the monitor and other objects such as walls.• Do not place anything around ventilation openings of the monitor.• Never block ventilation openings.• Do not put the plasma display panel side up.• Do not cover the monitor with a tablecloth, etc.• Do not place the monitor on a carpet or bedding, or near a curtain.Use only the correct power outlet.Incorrect power supply could result in fire or electrical shock. Use only the correct power outlet depending on the indication on the monitor andthe safety standard.• The enclosed power cord must be used depending on the power outlet to be used.Be cautious of the power cord connection.Incorrect connection of the power cord could result in fire or electrical shock.• Do not touch the power cord with a wet hand.• Check that the connecting portion of the power cord is clean (with no dust), before using. Use a soft and dry cloth to clean the power plug.• Insert the power plug into a power outlet firmly. Avoid using a loose, unsound outlet or contact failure.• Do not cut off the fitted power plug, the removal of which could lead to impaired performance. If you wish to extend the lead, obtain anappropriate extension lead or consult your dealer.• Should you require replacing the fuse in the molded plug with a new fuse, then please replace with new one of the same value, type andapproval as the original. Ensure the fuse cover is returned to its original position.Be sure to keep safety ground connection.Connect the ground terminal of AC inlet of this monitor with the ground terminal provided at the power outlet using the enclosed power cord. Ifthe provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet.Be careful in handling the power cord and external connection cables.If you keep using a damaged the power cord or cables, it can cause a fire or electrical shock. Do not apply too much heat, pressure or tensionto the power cord and cables.If the power cord or cables are damaged (exposed or broken core wires, etc.), contact your dealer.• Do not place the monitor or heavy objects on the power cord and cables. Also, do not place a spread, cover, etc, over them because thiscould result in the inadvertent placing of heavy objects on the concealed power cord or cables.• Do not pull the power cord and cables. When connecting and disconnecting the power cord or cables, do it with your hand holding the plugor connector.• Do not place the cord near the heater.• Do not touch the power plug just after disconnecting it from the power outlet to prevent electric shock.• Do not touch the power plug when lightening is close to you.• Avoid coiling the power cord and bending it sharply.• Protect the power cord from being walked on, pinched particularly at plugs, conveniences receptacles, and the point where they exit from theapparatus.• Do not modify the power cord.