Yamaha PDM-4210E User Manual

Also see for PDM-4210E: User manual

41ENGLISHSignal Input1234S-input connector pin specificationsPin Input signal1 Y2 Y-GND3 C4 C-GNDFrame GND20 18 16 14 12 10 8 6 4 221 19 17 15 13 11 9 7 5 3 1Scart connector pin specificationsPin Signal Pin Signal1 AUDIO OUT (RIGHT) 12 Not Used2 AUDIO IN (RIGHT) 13 RGB-R GND3 AUDIO OUT (LEFT/MONO) 14 GND4 AUDIO GND 15 RGB-R / S.VHS CHROMINANCE IN5 RGB-B GND 16 BLANKING SIGNAL6 AUDIO IN (LEFT/MONO) 17 COMPOSITE VIDEO GND7 RGB-B IN 18 BLANKING SIGNAL GND8 AUDIO/RGB SWITCH / 16:9 19 COMPOSITE VIDEO OUT9 RGB-G GND 20 COMPOSITE VIDEO / S.VHS LUMINANCE IN10 Not Used 21 GND / SHIELD (CHASSIS)11 RGB-G INRGB terminal (D-sub 15-pin connector)123456789101112131415• When different kinds of input signals are simultaneously input tothe monitor via a graphics board or the like, the monitor willautomatically select the signals in the following priority order:*There may be instances when correct display is not possible, evenwhen displaying the signals listed on the following page. In thiscase, use H/V separate sync, H/V composite sync.Sync signal type PriorityH/V separate sync. 1H/V composite sync. 2sync.on Green * 3Pin Input signal1 R (PR /CR )2 G or sync on green (Y)3 B (PB /CB )4 No connection5 No connection6 R.GND (P R/CR , GND)7 G.GND (Y, GND)8 B.GND (P B/CB , GND)9 No connection10 GND11 No connection12 [SDA]13 H. sync or H/V composite sync14 V.sync. [V.CLK]15 [SCL]( ) : With component inputPRODUCT SPECIFICATIONS (continued)