Yamaha PDM-4210E User Manual

Also see for PDM-4210E: User manual

19ENGLISHPictureAudioTimerFunctionSetupLanguageSelectOK SetFunctionScreen Saver OffScreen Wipe On 60Min.Black Side Panel OffVideo Power Save OffFreeze Mode SplitDefault Zoom PanoramicReset ResetSelect Set ReturnOKMENUFUNCTION MENUFunctionPanel Life NormalMode Display OffID Number 1Inverse On 60Min.Standby White OffGamma 2.2Reset ResetSelect Set ReturnSelected characters Setup hintScreen Saver Off 5Min. 10Min.60Min. 40Min. 20Min.This moves the picture around the screen in small amounts, at setintervals, to reduce the panel image retention. Image retentionoccurs when stationary objects, such as screen logos, leave a slightimage visible after they should have disappeared.Screen Wipe On 60Min.This is used to reduce the panel image retention that can occur withstationary pictures by displaying a completely white screen. SelectOn (continuous operation) or 60 Min. (time limit operation) and pressthe OK button. Press the MENU or RETURN button on the remotecontrol to return to normal viewing.Black Side Panel Off OnThis turns the gray sidebars On/Off when watching normal modescreen size area. It is always set to Off when the monitor is poweredOn. It is recommended to set Black Side Panel to off to reduce thepanel image retention.Video Power Save Optional (grayed out)Freeze Mode Optional (grayed out)Default Zoom Optional (grayed out)Reset (Selects the Reset mode) The original factory settings for the items of this Menu page can berestored by pressing the OK button.Panel Life Normal Extend 1 Extend 2This function suppresses the contrast of the screen regardless of theContrast setting in the Picture Menu. By this control, powerconsumption can be reduced or degradation of a panel can bemitigated. The order of power consumption is Extend 2 < Extend 1 <Normal.If the Contrast setting is changed when this item is set to Extend 1 or2, it will be changed to Normal automatically.Mode Display Off OnThis functions displays the Input Signal Screen Display every time theinput mode and signal mode are changed.Set to OFF if the Input Signal Screen Display is not needed whenswitching signals.ID Number 1 2 3 47 6 5Assigns ID nos. to the monitors so that they can be controlledindividually (up to 7 monitors can be controlled).Inverse On 60Min.This function changes each level of RGB signal invert to reduce thepanel image retention. When this function is required, select On(continuous operation) or 60Min. (time limit operation) and press theOK button. And press the Menu or Return button to exit.Standby White Off 15Min. 30Min.120Min. 60Min.This function is also provided to prevent image retention. If time is setfor this item, the screen changes into a white pattern when themonitor enters power save mode, and continues for the period ofsetting time.Gamma 2.2 2.8 Normally set to 2.2.OPERATING INSTRUCTIONS (continued)