Yamaha PDM-4210E User Manual

Also see for PDM-4210E: User manual

32OPERATING INSTRUCTIONSInput SwitchingAV1 AV2RGB 1 RGB 2AV3MUTE VOLVOLAV4AUTO PinPOKSIZE RECALLMENU• Input can be switched by pressing the AV1, AV2, AV3,AV4, RGB1 or RGB2 buttons of the remote control.• Input can be switched in the sequence of AV1➔AV2 ➔AV3 ➔ AV4 ➔ RGB1 ➔ RGB2 by pressing the INPUTSELECT button of the monitor.AV1 AV2 AV3RGB2 RGB1 AV4INPUT SELECT buttonRGB/VIDEObuttonsSIZE buttonEach time the SIZE button of the remote control or themonitor is pressed, the screen display size will changein sequence and the status will be displayed at thebottom of the screen.FullSize Switching• During VIDEO signal input (AV1, AV2, AV3)• The size will be fixed Full mode and not change when receivingthe component signal of 1080i/50, 1080i/60 or 720p/60.Panoramic 4:3 Full14:9Zoom C14:9L ZoomDisplay size selection diagramWhen you want to Set the display size to Input signal Display screen RemarksPlay a 4:3 image in a 16:9 screen. 4 : 3 Blanking occurs on both sides.Play a 4:3 image in a 16:9 screen with theheight and width of the middle of thescreen enlarged on equal scales and withboth sides appearing somewhat enlarged.PanoramicPlay a 16:9 VISTA size image from a 4:3image faithfully reproduced on the 16:9screen.Zoom• The 4:3 image is called a letterbox image.• In some cases, some slight blanking mayremain at the top and bottom.Play a 4:3 image faithfully from a 16:9screen in the standard vertical size andhorizontally squeezed.*Full* An image with an aspect ratio of 16:9shrunk horizontally to 4:3 to display in a 4:3screenPlay a 14:9 image in a 16:9 screenexpanded vertically and squeezedhorizontally.C14 : 9L This mode is provided for the broadcastingprogram with WSS code-C14:9L.Play a 14:9 image expanded vertically onthe 16:9 screen. 14 : 9Zoom This mode is provided for the broadcastingprogram with WSS code-14:9Zoom.(4:3 signal)(Squeeze)(Vista)SIZE button• During AV4 signal input• [Auto] is the mode using the Switch signal from the equipmentconnected to AV4 terminal included in SCART connector No.8 pinwhich indicate the picture format of the video source. WhenSwitch signal has not been detected, Default Zoom setting in theFunction Menu is used to choose.• And during some input mode except AV4, if the Switch signal isdetected under the condition that [Auto] is selected for thepicture size of AV4, the input mode will automatically transfer toAV4.Auto Full Zoom14:9Zoom C14:9L(14:9 signal)(14:9 signal)