Yamaha PDM-4210E User Manual

Also see for PDM-4210E: User manual

48OPERATING INSTRUCTIONS (continued)RECALL buttonMULTI PICTUREbuttonSELECT buttonsActivating the Split mode from the TV screenPressing the MULTI PICTURE button one time will display 2 pictures.• The speaker icon can be shifted left and right by pressing the A/B button; the audio will be output from theside on which the speaker icon is located.• The same signal input cannot be selected for both screens at the same time.• The TV channel can be changed by pressing the and PROGRAM UP/DOWN buttons on the remotecontrol.• The signal input mode of picture-A or picture-B (the one that the speaker icon is located on) can be selectedby pressing INPUT SELECT button on the remote control.• Pressing the MULTI PICTURE button once again will cancel the multi picture mode.• When the Video input is set to RGB Video, multi picture mode is not possible.• Refer to the table for 2 pictures (Split) mode.Activating the 4 pictures mode from the TV screenPressing the MULTI MODE button one time at the 2 pictures mode will display 4 pictures.• Press [A/B] button to select picture A or picture B indicated by a red triangle. For pictures on right, pressSELECT buttons to select picture. The selected channel number would change green.• The TV channel can be changed by pressing the and PROGRAM UP/DOWN buttons on the remotecontrol.• The audio can only be output from picture A in the 4 picture mode.• The same signal input mode cannot be selected for each screens at the same time.• Pressing the MULTI PICTURE button from the 4 picture mode will cancel the multi picture mode. Pressing theMULTI PICTURE button again will display the 4 pictures.• Refer to the table for 4 pictures mode.Activating the 12 pictures mode from the TV screenPressing the MULTI MODE button one time at the 4 pictures mode will display 12 pictures.• Starting from channel 1, preset channels will automatically display in sequence on the 12 windows.• This function activates only in TV mode.• After several seconds, it refreshes the picture one by one.• Pressing the MULTI PICTURE button at the 12 picture mode will cancel the multi picture mode. Pressing theMULTI PICTURE button again will display the 12 pictures again.• Pressing the MULTI MODE button from the 12 picture mode will display the 2 pictures (Split) mode.A B5 AV1492 pictures (Split) 4 pictures 12 picturesAV1 8611B1B2B3A1 2 3 45 6 7 89 10 11 12Displaying MULTI PICTUREMULTI MODEbuttonA/B buttonPROGRAM UP/DOWNbuttonsD / NA / Bi +MENUOKFREEZEZOOMAV1RGB1 RGB2AV2 AV3 AV42-4-12I / IIP+P-+-D V D1 2 34 5 67 809If the MULTI PICTURE button on the remote control ispressed, multiple pictures will display. Three types ofdisplay can be selected by pressing the MULTI MODEbutton on the remote control.The multi picture mode will change in the followingsequence each time the MULTI MODE button is pressed.49NOTE• Even if the input of the horizontal / vertical synchronizing signal (or video signal) stops during multi picture display, the mode will not changeto power save mode.• Please be careful since image retention will occur if the plasma display is left in a multi picture display state for a long period of time.