Yamaha PDM-4210E User Manual

Also see for PDM-4210E: User manual

20Selected characters Setup hintAuto Adjust*(Menu) (Adjust)Press the OK button to startautomatic regulation.Horizontal Position, Vertical Position, Horizontal Clock and ClockPhase are adjusted automatically.Horizontal PositionMoves the horizontal positionto left.Moves the horizontal positionto right. Adjust the left-side display position.(This function is only for RGB2. It is not available (grayed out) forRGB1.)Vertical PositionMoves down the verticalposition. Moves up the vertical position. Adjust the vertical display position.(This function is only for RGB2. It is not available (grayed out) forRGB1.)Horizontal ClockReduces the dot clockfrequency (shrinks the rightside).Increases the dot clockfrequency (expands the rightside). Adjust for maximum character clarity.(This function is only for RGB2. It is not available (grayed out) forRGB1.)Clock PhaseSlows the dot clock phase(shifts slightly to left).Advances the dot clock phase(shifts slightly to right). Adjust for clear character visibility.(This function is only for RGB2. It is not available (grayed out) forRGB1.)Reset (Selects the Reset mode) The original factory settings for the items of this Menu page can berestored by pressing the OK button. (This is effective only for RGB2.)Input Level 0.7V 1.0V Normally set to 0.7 V. If white is found to spread across the screen, setto 1.0 V. (This is effective only for RGB2.)Frequency Display Off On Set this to Off if the frequency information of the Input Signal ScreenDisplay is not required.WVGA Type Off On This is only available for W-VGA signal.When it is set to On, the display area modecan be selected Full orReal.Vertical Filter Off On Turn On when concerned about screen flicker.Frequency Mode Movie PC Set to Movie when viewing moving images on a personal computer.RGB1 Optional (grayed out)RGB2 Optional (grayed out)SETUP MENUPictureAudioTimerFunctionSetupLanguageSelectOK SetSetupAuto Adjust AdjustHorizontal Position 0Vertical Position + 31Horizontal Clock – 20Clock Phase 10Reset ResetSelect Return ExitSetupInput Level 0.7VFrequency Display OffWVGA Type OffVertical Filter OnFrequency Mode MovieRGB1 DVI-PCRGB2 RGBSelect Set ReturnOKMENUOPERATING INSTRUCTIONS (continued)* Depending on the type of signal displayed, displays may not be optimized through automatic adjustment. Adjust manually to optimize them.OKHorizontal Position 0Next / Prev Adjust ReturnSetupAuto Adjust AdjustHorizontal Position 0Vertical Position + 31Horizontal Clock – 20Clock Phase 10Reset ResetSelect Return ExitClock Phase 10Next / Prev Adjust ReturnOK