Yamaha R-N303 Owner's Manual

Also see for R-N303: Owner's manual

Contents

20 EnBASIC OPERATIONPlaying a source1 Press one of the input selection keys toselect the input source you want to listen to.2 Press SPEAKERS A and/or SPEAKERS B toselect speakers A and/or speakers B.The selected speakers will be enabled, and you canconfirm which speakers are selected on the frontdisplay (p. 6).Note• When one set of speakers is connected using bi-wireconnections, or when using two sets of speakers simultaneously(A and B), make sure “SP A” and “SP B” are displayed on thefront display.• When listening with headphones, turn off the speakers.3 Play the source.4 Press VOLUME +/– to adjust the soundoutput level.Note• You can adjust the tonal quality by using the BASS +/– andTREBLE +/– on the front panel (p. 5).• You can also adjust the speaker balance by using the “Balance”option in the “SETUP” menu (p. 41).Switching information on the frontdisplayWhen you select a network source or Bluetooth as theinput source, you can switch playback information on thefront display.1 Press DISPLAY.Each time you press the key, the displayed itemchanges.About 3 seconds later, the corresponding informationfor the displayed item appears.Note“_” (underscore) will be displayed for characters not supportedby the unit.PlaybackLINE 1CDTUNER NET BLUETOOTHBANDPRESETTUNINGCLEAR MODE DISPLAYMEMORYLINE 2 PHONODIMMER SLEEPSPEAKERSOPTICAL COAXIALBAMUTENOW PLAYINGRETURNOPTIONVOLUMEHOMESETUPSPEAKERS A/BVOLUMEInput selectionkeysInput source ItemBluetooth Track (song title), Artist (artist name),Album (album name)ServerAirPlayTrack (song title), Artist (artist name),Album (album name), Time (elapsed time)Net Radio Track (song title), Album (album name),Time (elapsed time), Station (station name)BANDPRESETTUNINGMUTENOW PLAYINGRETURNOPTIONVOLUMECLEAR MODE DISPLAYMEMORYENTERHOMESETUPDISPLAYSP ATrackINFOSP A› Track #1SERVER