11 EnCONNECTIONSPREPARATION EnglishIndoor antennas for receiving FM and AM broadcasts areincluded with this unit. In general, these antennas shouldprovide sufficient signal strength. Connect each antennacorrectly to the designated terminals.If you experience poor reception quality, install an outdoorantenna. Consult the nearest authorized Yamaha dealer or servicecenter about outdoor antennas.■ Assembling the supplied AM loopantenna■ Connecting the wire of the AM loopantennaPlug the power cable into an AC wall outlet after all otherconnections are complete.Only for General model:Before connecting the power cable, make sure you setVOLTAGE SELECTOR of this unit according to yourlocal voltage. Improper setting of VOLTAGE SELECTORmay cause fire and damage to this unit.Connecting the FM and AMantennasNoteIndoor FMantenna(included)Outdoor AM antenna*Outdoor FM antennaAM loopantenna(included)***Outdoor AM antennaUse 5 to 10 m of vinyl-covered wire extended outdoors from awindow.**AM loop antenna (included)• The AM loop antenna should always be connected, even if anoutdoor AM antenna is connected to this unit.• The AM loop antenna should be placed away from this unit.• The wires of the AM antenna have no polarity.Connecting power cableCAUTIONTo the AC walloutlet with thepower cable