8-183. Remove the dipstick and check that the oil is betweenthe upper and lower levels. If not, add oil to the upperlevel.2 Upper level3 Lower levelÈ For models without reverse transmissions(RX10/RX10S/RX10M/RX10MS)É For models with reverse transmissions(RX10R/RX10RS)CAUTION:@Make sure that no foreign material enters the drivechain housing.@4. Install the dipstick and align the notch 4 of the dip-stick handle with the projection 5 of the drive chainhousing.Chain tension adjustment1. Loosen the chain adjuster locknut.2. Turn the adjuster bolt clockwise until it is finger tight.3. Hold the adjuster bolt in place while tightening thechain adjuster locknut.1 Chain adjuster locknut2 Adjuster boltA BDrive chain oil:API GL-3SAE 75 or 80
