8-21ESU00191Ski spring preload adjustmentThe spring preload can be adjusted by turning the springpreload adjuster 1.For RX10/RX10S/RX10R/RX10RSCD-11EFor RX10M/RX10MSCD-11ECAUTION:@The left and right ski spring preload must be set tothe same pressure. Uneven settings can cause poorhandling and loss of stability.@WARNING@This shock absorber contains highly pressurizednitrogen gas. It could explode by improper handling,causing injury, or property damage. Do not tamper with or attempt to open the shockabsorber. Do not subject the shock absorber to an openflame or other high heat source, which couldcause it to explode. Do not deform or damage the shock absorber inany way. Do not dispose of a worn or damaged shockabsorber by yourself. Take the unit to a Yamahadealer.@Spring seat length StandardLong ← → ShortPreload Hard ← → Softa LengthMaximum156.6 mm(6.17 in)148.6 mm(5.85 in)Minimum146.6 mm(5.77 in)Spring seat length StandardLong ← → ShortPreload Hard ← → Softa LengthMaximum144.6 mm(5.69 in)134.6 mm(5.30 in)Minimum131.6 mm(5.18 in)