PERIODIC MAINTENANCE AND ADJUSTMENT6-3663. Insert a new bulb into the socket,push it in, and then turn it clock-wise until it stops.4. Install the lens by installing thescrew. NOTICE: Do not over-tighten the screw, otherwise thelens may break. [ECA11191]EAU24312Replacing the license platelight bulb1. Remove the license plate light unitby removing the screws.2. Remove the socket (together withthe bulb) by pulling it out.3. Remove the burnt-out bulb by pull-ing it out.4. Insert a new bulb into the socket.5. Install the socket (together with thebulb) by pushing it in.6. Install the license plate light unit byinstalling the screws.1. Turn signal light bulb1. Screw1. License plate light bulb2. License plate light unit
