PERIODIC MAINTENANCE AND ADJUSTMENT6-3965. Install the brake hose holders byinstalling the bolts and nuts.6. Tighten the axle bolt to the speci-fied torque.TIPWhile tightening the axle bolt, hold thewheel axle with a 19-mm hexagonwrench to keep it from turning.7. Tighten wheel axle pinch bolt B,then pinch bolt A to the specifiedtorque.8. Retighten pinch bolt B to the spec-ified torque.9. Tap the outer side of the right forkleg with a rubber mallet to align itwith the end of the wheel axle.10. Tighten wheel axle pinch bolt D,then pinch bolt C to the specifiedtorque.11. Retighten pinch bolt D to the spec-ified torque.12. While applying the front brake,push down hard on the handlebarseveral times to check for properfork operation.Tightening torque:Brake caliper bolt:35 Nm (3.5 m·kgf, 25 ft·lbf)Tightening torque:Axle bolt:91 Nm (9.1 m·kgf, 66 ft·lbf)1. Front wheel axle pinch bolt A2. Front wheel axle pinch bolt B3. Front wheel axle pinch bolt C4. Front wheel axle pinch bolt DTightening torque:Wheel axle pinch bolt:21 Nm (2.1 m·kgf, 15 ft·lbf)Tightening torque:Wheel axle pinch bolt:21 Nm (2.1 m·kgf, 15 ft·lbf)
