Advanced Features105Procedure1. Tap the BLF key to pick up the call for the monitored line directly.Related TopicSetting the Directed Call Pickup Code for BLF keyTransferring a Call by BLF KeyWhen there is already an active call on the IP phones, you can transfer the active call to the monitored line by tappingthe BLF key.The phone transfers (Blind Transfer or Attended Transfer) the active call differently depending on the Transfer Mode viaDsskey feature configured by your system administrator.TopicsPerforming a Blind TransferPerforming a Semi-attended/Attended TransferPerforming a Blind TransferBefore You BeginCheck with your system administrator if the Transfer Mode via Dsskey is set to Blind Transfer.Procedure1. During a call, tap More->Dsskey.2. Tap the BLF key of the monitored user which you want to transfer this call to.Performing a Semi-attended/Attended TransferBefore You BeginCheck with your system administrator if the Transfer Mode via Dsskey is set to Attended Transfer.Procedure1. During a call, tap More->Dsskey.2. Tap the BLF key of the monitored user which you want to transfer this call to. The phone will dial out the number ofthe monitored line.3. Tap the BLF key of the monitored user again to complete the transfer when the monitored user receives ringback orafter the monitored user answers the call.BLF ListBLF List feature enables you to monitor a list of users defined by your system administrator. For example, your systemadministrator has enabled BLF List feature and created a BLF List URI (for example, BLFList@example.com) with user1and user2 in the list on the server. After configuration, the BLF List keys on the IP phone can present the status of user1and user2, and the respective icons will either flash or glow depending on the status of monitored lines.Check with your system administrator to find out if this feature is available on your phone.Topics
