Yealink CP960 User Guide40Connecting to an Available Wireless Network ManuallyBefore You BeginGet the password of the wireless network from your system administrator. Make sure that the Wi-Fi mode is activated.Procedure1. Navigate to Settings->Basic Settings->Wi-Fi.The phone will automatically search for available wireless networks in your area.2. (Optional.) To re-search the available network, tap and then tap Scan.3. Tap the desired wireless network (SSID) to connect to it.4. If the network is secure, enter its password in the Password field.Do the following:l Tap the Show password radio box to make the password visible.l Tap the Show advanced options radio box to configure the HTTP proxy for the Browser application.5. Tap Connect to connect to the wireless network.Once the connection has completed successfully, the prompt “Connected” appears under the corresponding SSID.Related TopicActivating the Wi-Fi ModeConnecting to the Wireless Network Using Wi-Fi Protected Setup (WPS)Wi-Fi Protected Setup (WPS) provides simplified mechanisms to configure secure wireless networks. WPS can auto-matically configure a wireless network with a network name (SSID) and strong WPA data encryption and authen-tication.Two methods supported by Yealink IP phones in the Wi-Fi protected setup:l Push Button Configuration (PBC): The user simply has to push the WPS key on both the IP phone and gate-way/router to connect.
