Customizing Your Phone41l Personal Identification Number (PIN): The user has to enter a WPS PIN generated randomly by the IP phone on thegateway/router to connect.Before You BeginMake sure that the Wi-Fi mode is activated.Push Button Configuration (PBC)Procedure1. Navigate to Settings->Basic Settings->Wi-Fi.2. Tap and then tap WPS.The touch screen prompts “Press the Wi-Fi Protected Setup button on your router. It may be called “WPS” or con-tain this symbol:”.3. Long press the WPS key on your gateway/router.Once WPS setup has completed successfully, the touch screen will prompt “Connected”.Personal Identification Number (PIN)Procedure1. Navigate to Settings->Basic Settings->Wi-Fi.2. Tap and then tap WPS-PIN.The touch screen prompts “Enter pin XXX on your Wi-Fi router. The setup can take up to two minutes to com-plete.”.3. Note the PIN code.4. Log into your gateway/router’s web interface, and configure it to search the clients. For more information, refer tothe documentation from the gateway/router manufacturer.Once the WPS-PIN setup has completed successfully, the gateway/router’s web interface will prompt success.Adding a Wireless Network ManuallyIf your gateway/router has SSID broadcast disabled, it might not appear in the scanning results. In that case, you mustmanually add a wireless network.Before You BeginGet the available wireless network information from your system administrator. Make sure that the Wi-Fi mode is activ-ated.Procedure1. Navigate to Settings->Basic Settings->Wi-Fi.2. Tap ->Add.3. Enter the desired value in the Network SSID field.4. Tap the Security field.5. Tap the desired value.l If you select WEP or WPA/WPA2 PSK, enter the password in the Password field.l If you select 802.1x EAP, tap the EAP method field, select the desired EAP method and then enter the desiredvalues in the corresponding fields.6. Do the following:
