Yealink CP960 User Guide116Before You BeginGet the voice mail code from your system administrator.Procedure1. Tap to launch Message application.2. Tap Set Voice Mail.3. Enter the voice mail code (for example, *4) in the desired account field.4. Tap .Receiving a Voice MessageWhen receiving a new voice mail, the phone plays a warning tone and the power LED indicator slowly flashes red. Amessage of “n New Voice Mail(s)” (“n” indicates the number of unread voice messages) is displayed on the phonescreen.If the voice mail prompt box disappears, it will not pop up again unless the user receives a new voice mail or the userre-registers the account that has unread voice mail(s).NoteYour system administrator can disable the prompt box for new message(s).Leaving Voice MailsYou can leave a voice mail for other people when they are busy or inconvenient to answer the call. Follow the voiceprompt from the system server to leave a voice mail, and then hang up.Listening to Voice MailsWhen the phone screen prompts that the phone receives a new voice mail, you can tap Connect to dial out the voicemail access code directly, or tap Exit to close the prompt box when you are not ready to listen to your voice mail.
