Basic Call Features129Performing a Semi-attended/Attended TransferProcedure:1. Press the TRANSFER key or Transfer during a call.2. You can do one of the following:- Enter the number you or select a contact from the placed call list want to transfer thecall to.- Press Directory. Select a desired contact from the Directory list(s).3. Press the OK key, # key or Send to dial out.4. Press the TRANSFER key or Transfer to perform a semi-attended transfer when you hearthe ring-back tone, or perform an attended transfer after the party answers the call.If you are using a handset, the transfer can be completed by hanging up the handset.From the Calls screen or Transfer to screen, you can also use a Transfer key (refer to Configuringa Transfer Key), BLF/BLF List key (refer to Configuring a BLF Key/Configuring BLF List Settings) orSpeed Dial key (refer to Placing a Call Using a Speed Dial Key) to performsemi-attended/attended transfer to the pre-defined number directly. Before performing asemi-attended/attended transfer using these keys, make sure that the Transfer Mode via Dsskeyis configured as New Call or Attended Transfer. For more information on how to configure it,refer to Configuring Transfer Mode via Dsskey.ConferenceThe IP phones support 3-way local conference and multi-way network conference.NoteLocal ConferenceThe IP phones support three-way (including yourself) conference call, which is the defaultconference type called Local Conference. You can set up a conference between an active calland a hold call at any time by pressing the Conference (Conf) soft key.NoteNetwork conference is not available on all servers. For more information, contact your systemadministrator.To set up a local conference call, make sure local conference feature is enabled. For moreinformation, contact your system administrator.
