Maintaining Your Phone211Resetting to Factory SettingsGenerally, some common issues may occur while using the IP phone. Your system administratormay ask you to reset your phone to factory configurations after you have tried alltroubleshooting suggestions but still do not solve the problem. This operation will delete allyour personal configuration settings, and reset all settings to the manufacturer default setting.Check with your system administrator if the personalized settings are kept before resetting yourphone to factory settings.Procedure:1. Navigate to Menu->Advanced (default password: admin) ->Reset Config.2. Highlight the Reset to factory settings, and then press Reset.A message is displayed on the LCD screen:3. Press OK.The phone begins resetting.You can also long press the OK key when the phone is idle.After reset, the LCD screen prompts “Welcome Initializing…Please wait”.The phone will be reset sucessfully after startup.Resetting to factory settings is operable via web user interface at the pathSettings->Upgrade.Note Reset of your phone may take a few minutes. Do not power off until the phone has started upsuccessfully.
