| Accessories with Your System | 103Controlling VCC22 Camera by Remote ControlProcedure1. On your remote control, press the right navigation key twice to enter the cameras list.2. Select the desired camera and then press OK key.3. Press the navigation key to adjust the angle of the camera.4. Press or to adjust the focal length.Controlling VCC22 Camera by CP960Procedure1. When your system is idle, on your CP960, tap Camera.2. Tap The current control camera.3. Tap the desired camera.4.Tap to return.5. Tap the navigation keys to adjust the camera angle.6. Press or to adjust the focal length.Camera LayoutDuring a call, all video streams captured by the connected cameras are synthesized to one video stream, and then sentto the far site. The supported camera layouts are as below:• 1+N: the video stream captured by the selected camera is given prominence in the largest pane. Others aredisplayed in small panes.• Selected Speaker: the video stream captured by the selected camera is displayed in a large pane.• Equal N×N: all video streams are given equal prominence in equal-sized panes.Controlling Multiple Remote CamerasDuring a call, if one call party enables the Far Control Near Camera feature on his device, you can control the cameraof the call party. When the remote party connects multiple VCC22 video conferencing cameras, the camera you cancontrol depends on the remote camera layout:• When the remote camera layout is 1+N, you can control the camera whose video image is displayed in the largestpane.• When the remote camera layout is Selected Speaker, you can control the camera whose video image is displayedin the full screen.• When the remote camera layout is Equal N×N and the remote uses VC800 system, you can control the VC800camera.• When the remote camera layout is Equal N×N and the remote uses VC880/PVT980 system, you can control thefirst camera that the remote connects.