| Settings | 96Specifying Content to the Secondary ScreenWhen you connect dual displays, you can use the default layout, or specify the content to the secondary monitor viathe remote control. This feature is not available to VC200 endpoint.• Specifying Content to the Secondary Screen by Remote ControlSpecifying Content to the Secondary Screen by Remote ControlProcedure1. On your remote control, press OK key to open Talk Menu during a call.2. Select Layout Adjustment > Focus (Display2).3. Select the desired content for the secondary screen.The secondary screen displays the selected content. If you specify a new content on the secondary screen, the PCcontent on the second screen will automatically be displayed on the primary screen.Configuring Camera SettingsYou can configure camera settings on the system.• Controlling Cameras• Allowing the Remote System to Control Your Camera• Setting Camera PresetsControlling CamerasYou can control the built-in camera or the VCC22 video conferencing camera connected to your local system. Duringa call, if one call party enables the Far Control Near Camera feature on his device, you can control his camera.• Adjusting Cameras When not in a Call by Remote Control• Adjusting Cameras When not in a Call by CP960• Adjusting Cameras in a Call by Remote Control• Controlling Cameras by CP960 during a CallRelated tasksControlling Multiple Remote CamerasAdjusting Cameras When not in a Call by Remote ControlProcedure1. On your remote control, select the desired video.2. Tap the navigation keys to adjust the camera angle.3. Press or to adjust the focal length.
