| Operating Calls | 33• Placing a Call by Entering a Number• Editing Numbers Before Calling• Placing a Call from the Search Result• Placing Calls to Contacts• Placing Calls from Call HistoryPlacing a Call by Entering a NumberYou can dial the following contacts on your system: SIP URI (for example, 2210@sip.com), IP address (for example,192.168.1.15), H. 323 account, SIP account, Cloud account or PSTN account. If you register different accounts on thephone, you can use one of them to place the call, including the Cloud platform/H.323 account/SIP account/PSTNaccount/H.323 IP Call/SIP IP Call. The VC200 Custom Edition for Yealink Cloud can dial Yealink Cloud accountonly.• Dialing the Number by Remote Control• Dialing the Number by CP960Dialing the Number by Remote ControlProcedure1. On your remote control, go to Dial.2. Optional: Select the desired call type from the Call Type drop-down menu.3. Enter the number.4. Press OK key to place a video call.If you want to place a voice call, press the right key to select (voice call).Dialing the Number by CP960Procedure1. On your CP960 tap New Call.2. Optional: Tap Auto, and select the desired call type from the drop-down menu.3. Enter the number.4. Tap Send.Tip: If the administrator enables the Fast Audio Call feature, you can tap Audio Call on CP960 to placevoice calls.Editing Numbers Before CallingEditing numbers before calling allows you to edit the call record and dial it out, so that you do not need to enter thesimilar number again.• Editing Numbers before Calling by Remote Control• Editing Numbers Before Calling by CP960