| Settings | 98Setting Camera PresetsCamera presets are pre-saved values of the angle and the focal length of the camera with respect to the desiredpositions. Camera presets can help you quickly point the camera to a pre-defined location.• Storing a Camera Preset• Adjusting the Local Camera to a Preset• Updating the Stored Preset• Editing the Stored Preset• Deleting the Stored Preset• Clearing up the Stored PresetStoring a Camera PresetYou can store up to 99 camera presets for the local camera.• Adding the Preset by Remote controlAdding the Preset by Remote controlProcedure1. Do one of the following when your system is idle:• For VC880/VC800/VC500/PVT980/PVT950, navigate to More > Preset Location.• If you are using remote control, select the local video image and press OK key, and then press .2. Select New Preset.3. If you connect VCC22 video conferencing camera to your VC880/VC800/PVT980 video conferencing system,select the desired camera.4. Press the navigation key to adjust the angle of the camera or press the / to adjust the focal length.5. Press OK key to store the camera preset.Adjusting the Local Camera to a PresetYou can quickly adjust the position of your camera to a preset.• Adjusting the Local Camera to a Preset by Remote ControlAdjusting the Local Camera to a Preset by Remote ControlProcedure1. Do one of the following:• When the system is idle, for VC880/VC800/VC500/PVT980/PVT950, navigate to More > Preset Location.• When the system is idle, select a local video image and press OK key, and then press .• When the system is during a call, press OK key and select Preset Location.