| Settings | 91Configuring Video SettingsYou can configure video settings on the system.• Maximizing Monitor Video Display• Allowing Website Snapshot• Video Input Source• Changing the Screen LayoutMaximizing Monitor Video DisplayYour monitor may not display the entire HD image. To solve this problem, you can scale the monitor to display theentire HD image manually.• Maximizing Monitor Video Display by Remote ControlMaximizing Monitor Video Display by Remote ControlProcedure1. On your remote control, go to More > Setting > Basic > Display.2. Use left or right key to adjust the Display (90%-100%) slider.3. Select Save and then press OK key to accept the change.Allowing Website SnapshotYou can enable the Website Snapshot feature, so that the image on the monitor can be synchronized to the web userinterface. If you do not want others to view the image displayed on your monitor, you can disable this feature.• Allowing Website Snapshot by Remote ControlAllowing Website Snapshot by Remote ControlProcedure1. On your remote control, go to More > Setting > Basic.2. Enable Website Snapshot.3. Select Save and then press OK key to accept the change.Video Input SourceThe system supports the video input sources both from the camera and the PC.• Changing the Video Input Source When not in a Call• Changing the Video Input Source in a CallChanging the Video Input Source When not in a CallBefore you beginTo use the PC input source, make sure that your system is connected to a PC.