Configuring the Handset127Note: It will take effect on all handsets that are registered on the same base station. Itworks only if the value of the parameter “auto_provision.handset_configured.enable” is setto 1 (Enabled).Web User Interface:NoneHandset User Interface:OK->Settings->Display->Display Backlight->In Chargercustom.handset.backlight_out_of_charger.enable 0 or 1 0Description:Enables or disables the handset to always turn on the backlight when it is not in thecharging state.0-Disabled1-EnabledIf it is set to 0 (Disabled), the backlight will be turned off after the handset is idle for aperiod of time when it is not in the charging state.Note: It will take effect on all handsets that are registered on the same base station. Itworks only if the value of the parameter “auto_provision.handset_configured.enable” is setto 1 (Enabled).Web User Interface:NoneHandset User Interface:OK->Settings->Display->Display Backlight->Out Of ChargerTo configure the backlight via handset user interface:1. Press OK to enter the main menu.2. Select Settings->Display->Display Backlight.3. Press or to select the desired value from the In Charger field.4. Press or to select the desired value from the Out Of Charger field.5. Press the Save soft key to accept the change or the Back soft key to cancel.Wallpaper for W56H HandsetWallpaper is an image used as the background of the handset idle screen. Users can select animage from handset’s built-in background. It is only applicable to W56H handset.ProcedureWallpaper can be configured using the following methods.Configuratio y000000000077.cfg Configure the wallpaper displayed on
