Configuring the Handset129ProcedureScreen saver can be configured using the following methods.Configuration File y000000000077.cfgConfigure the screensaver of thehandset LCD screen.Parameter:custom.handset.screen_saver.enableHandset User Interface Configure the screen saver of thehandset LCD screen.Details of Configuration Parameters:Parameter Permitted Values Defaultcustom.handset.screen_saver.enable 0 or 1 1Description:Enables or disables screen saver feature.0-Disabled1-EnabledIf it is set to 1 (Enabled), an analog clock will be activated and appear on the LCD screen ifno user activity is sensed for approximately 10 seconds.Note: It will take effect on all handsets that are registered on the same base station. Itworks only if the value of the parameter “auto_provision.handset_configured.enable” is setto 1 (Enabled).Web User Interface:NoneHandset User Interface:OK->Settings->Display->Screen SaverTo configure screen saver via handset user interface:1. Press OK to enter the main menu.2. Select Settings->Display->Screen Saver.3. Press the Change soft key to check or uncheck the Screen Saver checkbox.Color Scheme for W52H HandsetYou can change the background of your handset by changing the color theme. There are 2color themes available. It is only applicable to W52H handset.
