Configuring Basic Features229Parameters Permitted Values DefaultNoneTo configure anonymous call rejection via web user interface:1. Click on Account->Basic.2. Select the desired account from the pull-down list of Account.3. Select the desired value from the pull-down list of Local Anonymous Rejection.4. Select the desired value from the pull-down list of Send Anonymous Rejection code.5. (Optional.) Enter the send anonymous rejection on code in the On Code field.6. (Optional.) Enter the send anonymous rejection off code in the Off Code field.7. Click Confirm to accept the change.To configure anonymous call rejection feature for a specific line via handset userinterface:1. Press OK to enter the main menu.2. Select Settings->Anon.Call Rejection.The LCD screen displays the incoming lines currently assigned to the handset.3. Press or to highlight the desired line, and then press the OK soft key.4. Press or to select the desired value from the Status field.5. Press the OK soft key to accept the change.Do Not Disturb (DND)DND allows DECT IP phones to ignore incoming calls. DND feature can be configured on aphone or a per-line basis depending on the DND mode.The DND on code and DND off code configured on DECT IP phones are used toactivate/deactivate the server-side DND feature. They may vary on different servers.
